TE Connectivity Connector & Component 3D CAD / ECAD Models
Provider：TE Connectivity
TE Connectivity ships STEP/IGES and ECAD models on product pages (free Library Loader) and 16M+ verified symbols, footprints and 3D models via Ultra Librarian.
Get it from the source → This link failed a recent check — please verify on the official site
At a glance
- Readiness
- L1 · Rigid-body ready
- Rationale
- The full portfolio — connectors, relays, sensors, resistors — offers STEP/IGES 3D models and ECAD models on each product page with extractable mass and collision geometry, hence L1; ECAD models must be converted to the local ECAD format through the free Library Loader, and the geometry carries no material parameters for EM or thermal simulation.
- Scale
- Covers connectors, relays, sensors and resistors across the whole portfolio; product pages provide STEP/IGES 3D models and ECAD models (via the free Library Loader); Ultra Librarian additionally hosts 16M+ verified symbols, footprints and 3D models including the full TE line. (The 16M+ Ultra Librarian figure and the TE partnership come from its official resource page; the per-product STEP/IGES and ECAD entry points follow TE's product-page structure. TE publishes no single-vendor model count, so coverage is stated by product line and platform. Checked 2026-10-31.)
- License
- Proprietary but free — CAD/ECAD models are free for product design; intellectual property belongs to TE Connectivity and may not be redistributed or used outside design. ECAD models require the free Library Loader to convert into the local ECAD format; the Product Drawing remains the authoritative source for all design activity, models are not guaranteed precise, and critical dimensions must come from TE's official drawings and datasheets.
- Access
- Open
- Formats
- step · iges · other
- Runtimes
- other
- Physics properties
- Collision geometryMass / inertiaElectrical
- Domain
- Electromagnetics / Power
- Published
- 2026-10-31
- Updated
- 2026-10-31
Why it is listed
TE Connectivity is one of the largest connector and sensor vendors in the world, and its per-product CAD/ECAD downloads are the practical source for any electromechanical or electronic digital twin that must place a real, sourced component rather than a generic block.
Readiness assessment
Each TE product page exposes STEP/IGES 3D models plus an ECAD model, so rigid-body geometry with extractable mass and collision shells is available — that is L1. Note the distinction: the 3D files are plain geometry, and the ECAD model needs the free Library Loader to become a usable schematic symbol and footprint. Neither carries the material parameters needed for EM or thermal simulation.
Practical notes
Open a product page, go to the CAD Files section, and download the STEP/IGES zip directly or the ECAD model (then run the free Library Loader). Treat the Product Drawing as authoritative: TE explicitly says to base all design activity on it, and models are not guaranteed precise. For bulk PCB libraries, search TE on Ultra Librarian, which hosts 16M+ verified symbols, footprints and 3D models across vendors including TE.
Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.
License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.