Omron Factory Automation Components 3D Models & ECAD Data
Provider:Omron
Omron serves 3D models and ECAD data for relays, switches and sensors by part number via its component portal and FA CAD downloads, for control-cabinet and FA twins.
At a glance
- Readiness
- L1 · Rigid-body ready
- Rationale
- Product pages and portals provide to-scale 3D models (STEP among them) and ECAD/CAx data, with extractable mass and collision geometry, hence L1; the assets are component exterior geometry and electrical-connectivity definitions, with no material parameters for EM, thermal or contact-mechanics simulation.
- Scale
- Covers the full line of relays, switches, sensors and controllers; the component portal (SamacSys) serves 3D/ECAD data by part number, and the FA CAD download page provides STEP models. (The part-number lookup and STEP/ECAD download across the component portal and FA CAD page follow Omron’s official portal structure; no single-vendor model count is published, so coverage is stated by product line and portal. Checked 2026-11-01.)
- License
- Proprietary but free — 3D CAD and ECAD data are free for product design; the intellectual property belongs to Omron and may not be redistributed or used outside design. The models are exterior geometry; current and switching ratings must come from the official technical datasheets.
- Access
- Open
- Formats
- step · iges · other · dict
- Runtimes
- other
- Physics properties
- Collision geometryMass / inertiaElectrical
- Domain
- Electromagnetics / Power · Solid / Structure
- Published
- 2026-11-01
- Updated
- 2026-11-06
Why it is listed
Omron is a factory-automation leader whose relays, switches, sensors and controllers sit in nearly every control cabinet. For a control-cabinet or FA twin, its geometry and ECAD data are what the model needs, served from the vendor’s own component portals.
Readiness assessment
Omron serves 3D models and ECAD data (SamacSys) per component via its component portal, plus FA CAD downloads, giving rigid-body geometry with extractable mass and collision shells — that is L1. The assets are component and housing geometry; they carry no material parameters for EM or thermal simulation, and ratings must come from the datasheet.
Practical notes
Open the Omron component portal or the FA CAD download page, search by part number, then download the 3D model or the ECAD block. For a cabinet layout, import the STEP body and place it on the rail. Current and switching ratings are in the product drawing, not the mesh.
Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.
License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.