Legrand Electrical Installation BIM & 3D STEP Models
Provider:Legrand
Legrand serves BIM (Revit) and 3D STEP models for wiring devices, cable management and enclosures, for building and power-distribution twins.
At a glance
- Readiness
- L1 · Rigid-body ready
- Rationale
- Product pages and portals provide to-scale 3D models (STEP among them) and ECAD/CAx data, with extractable mass and collision geometry, hence L1; the assets are component exterior geometry and electrical-connectivity definitions, with no material parameters for EM, thermal or contact-mechanics simulation.
- Scale
- Covers the full line of wiring devices, cable-management systems, enclosures and power-distribution components; the resource library serves BIM models (Revit .rfa/.rvt/.zip) and 3D STEP data by product family. (The product-family filter and Revit/STEP download on the BIM models resource page follow Legrand’s official resource-library structure; no single-vendor model count is published, so coverage is stated by product line and library. Checked 2026-11-01.)
- License
- Proprietary but free — BIM and 3D CAD data are free for building and product design; the intellectual property belongs to Legrand and may not be redistributed or used outside design. The models are exterior geometry; current and breaking ratings must come from the official technical datasheets.
- Access
- Open
- Formats
- step · other
- Runtimes
- other
- Physics properties
- Collision geometryMass / inertiaElectrical
- Domain
- Electromagnetics / Power · Solid / Structure
- Published
- 2026-11-01
- Updated
- 2026-11-06
Why it is listed
Legrand is a global specialist in electrical and digital building infrastructure — wiring devices, cable management and cabinet systems. For a building or panel twin, its BIM and 3D models let the electrical layer drop straight into the architectural model.
Readiness assessment
Legrand publishes BIM models (Revit .rfa/.rvt) and 3D STEP data through its resource library, giving rigid-body geometry with extractable mass and collision shells — that is L1. The assets are device and enclosure geometry; they carry no material parameters for EM or thermal simulation, and ratings must come from the datasheet.
Practical notes
Open the BIM models resource page, filter by product family, then download the Revit or STEP file for the specific device. For a panel layout, import the STEP body and place it on the rail. Current and breaking ratings are in the product drawing, not the mesh.
Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.
License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.