JST Terminal & Board Connector 3D CAD Models
Provider:JST
JST serves 3D CAD models for terminals and board connectors by part number via PARTcommunity, TraceParts and 3D ContentCentral, for board-level and device twins.
At a glance
- Readiness
- L1 · Rigid-body ready
- Rationale
- Product pages and portals provide to-scale 3D models (STEP among them) and ECAD/CAx data, with extractable mass and collision geometry, hence L1; the assets are component exterior geometry and electrical-connectivity definitions, with no material parameters for EM, thermal or contact-mechanics simulation.
- Scale
- Covers the full line of terminals, board-to-board, wire-to-board connectors and inserts; PARTcommunity, TraceParts and 3D ContentCentral serve 3D CAD models by part number. (The part-number lookup and STEP download across the PARTcommunity/TraceParts manufacturer portals follow JST’s official CAD-distribution structure; no single-vendor model count is published, so coverage is stated by product line and portal. Checked 2026-11-01.)
- License
- Proprietary but free — 3D CAD data are free for product design; the intellectual property belongs to JST and may not be redistributed or used outside design. The models are exterior geometry; current rating and contact resistance must come from the official technical datasheets.
- Access
- Open
- Formats
- step · iges · other · dict
- Runtimes
- other
- Physics properties
- Collision geometryMass / inertiaElectrical
- Domain
- Electromagnetics / Power · Solid / Structure
- Published
- 2026-11-01
- Updated
- 2026-11-06
Why it is listed
JST is a Japanese connector maker whose terminals and board connectors are ubiquitous in consumer and automotive electronics. For a board-level or device twin, its connector geometry is what the mechanical model needs, served from the vendor’s own portals.
Readiness assessment
JST connectors are available as 3D CAD models through PARTcommunity, TraceParts and 3D ContentCentral per part number, giving rigid-body geometry with extractable mass and collision shells — that is L1. The assets are connector housing geometry; they carry no material parameters for EM or thermal simulation, and current/contact ratings must come from the datasheet.
Practical notes
Open the JST manufacturer portal on PARTcommunity (or TraceParts), pick the series, then download the STEP model for the specific part number. For a board layout, match the footprint with the mechanical model. Current and contact ratings are in the product drawing, not the mesh.
Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.
License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.