Rigid-body ready Industrial digital twin Proprietary but free Open

Belden Industrial Cable & Connector 3D STEP Models

Provider:Belden

Belden serves 3D STEP models (.zip) per part number for signal and power cable connectors, for industrial and broadcast-network twins.

Get it from the source →

At a glance

Readiness
L1 · Rigid-body ready
Rationale
Product pages and portals provide to-scale 3D models (STEP among them) and ECAD/CAx data, with extractable mass and collision geometry, hence L1; the assets are component exterior geometry and electrical-connectivity definitions, with no material parameters for EM, thermal or contact-mechanics simulation.
Scale
Covers the full line of industrial ethernet cables, coaxial cables, connectors and cable-management accessories; product-page Resources sections serve 3D STEP models (3D_step_*.zip) per part number. (The part-number lookup and 3D_step_*.zip download in the product-page Resources section follow Belden’s official product-page structure; no single-vendor model count is published, so coverage is stated by product line and page. Checked 2026-11-01.)
License
Proprietary but free — 3D CAD data are free for product design; the intellectual property belongs to Belden and may not be redistributed or used outside design. The models are exterior geometry; current rating and voltage class must come from the official technical datasheets.
Access
Open
Formats
step · other
Runtimes
other
Physics properties
Collision geometryMass / inertiaElectrical
Domain
Electromagnetics / Power · Solid / Structure
Published
2026-11-01
Updated
2026-11-06

Why it is listed

Belden is a leading maker of signal and power cables, connectors and cable-management for industrial and broadcast networks. For a cabling or machine twin, its geometry — connector bodies and cable routes — is what the mechanical model needs, and it is served from the vendor’s own product pages.

Readiness assessment

Belden product pages provide 3D STEP models (shipped as .zip) per part number, giving rigid-body geometry with extractable mass and collision shells — that is L1. The assets are exterior connector and cable geometry; they carry no material parameters for EM or thermal simulation, and current/voltage ratings must come from the datasheet.

Practical notes

On a product page, open Resources and download the 3D_step_*.zip for the specific part number, then extract the STEP model. For a cable run, model the connector body at each end and route the cable between them. Current and voltage ratings are in the product drawing, not the mesh.

Disclaimer: license and usage terms follow the official source — verify them yourself before use. This site indexes and links only; it does not host or mirror any asset file.

License and usage terms are those of the official source — verify before use. No asset file is hosted or mirrored on this site.